ABB AX413 User Manual page 7

Use the Menu Key
to scroll through
the Menus
Section 5.5, Page 31
CONFIG.OUTPUTS Config. Output 1
AO1: Assign
AO1: Range
AO1: Span Value
AO1: Zero Value
AO1: Default
AO1: Default Val
Section 5.6, Page 33
CONFIG.CLOCK Set Clock?
Format
Date
Time
Press To Set
Displayed only if option board fitted and serial communications feature enabled (Section 7.3) –
CONFIG.SERIAL
see Supplementary Manual PROFIBUS Datalink Description (IM/PROBUS)
Section 5.7, Page 34
CONFIG. CONTROL Controller
Section 5.8, Page 37
CONFIG.SECURITY Alter Sec.Code
Alter Cal.Code
Section 5.9, Page 39
CONFIG.LOGBOOK Logbook
Section 5.10, Page 40
Test Outputs
TEST/MAINTENANCE
Test Output 1
Test Output 2
Test Output 3
Test Output 4
To
FACTORY SETTINGS
(see Section 7.3, Page 53)
Use the Sidescroll Key to scroll through the Pages within each Menu
Config. Output 2
AO2: Assign
AO2: Range
AO2: Span Value
AO2: Zero Value
AO2: Default
AO2: Default Val
dd/mm/yy
01:01:02
12:00
Press To Abort
PID Controller
Control Action
Prop. Band
Integral time
Derivative time
Output Type
Pulses/Minute
OR
Cycle Time
OR
Output Range
Maintenance
Hold Outputs
Automatic Time
Press
Fig. 2.3B Overall Programming Chart
Config. Output 3 Config. Output 4
AO3: Assign AO4: Assign
AO3: Range AO4: Range
AO3: Span Value AO4: Span Value
AO3: Zero Value AO4: Zero Value
AO3: Default AO4: Default
AO3: Default Val AO4: Default Val
Power Recovery
Power Rec. Mode
Default Output
Load/Save Config
Factory Config.
User Config.
To Set Press To Abort
2 OPERATION...
Key
Single input analyzer only
Available only if option board fitted and
analog features enabled – see Section 7.3
5