...7 CALIBRATION
...7.3 Factory Settings
100. 0
Ohms
100. 0
Calib
A: Ref. Checking
2000
Ohms
2000
Calib
A:T.Zero
(2K0)
5000
Ohms
5000
Calib
A:T.Span
(5K0)
Cal. Sensor A
No
-----
Yes
A: Abort Cal.
56
Reference Resistance Checking
The analyzer calibrates the internal reference resistance automatically to compensate for
changes in ambient temperatures.
The display advances automatically to the next step once a stable and valid value is
recorded.
Temperature Zero (2000R ohms)
Set the temperature simulator to 2000R ohms
The display advances automatically to the next step once a stable and valid value is
recorded.
Temperature Span (5000R ohms)
Set the temperature simulator to 5000R ohms
The display returns automatically to
Abort Calibration
Select Yes or No
selected:
Yes
–
completion of
before
A:T.Zero
(1K0)
A:T.Zero (1K0)
–
completion of
CAL. SENSOR A
after
Calibrate Sensor A
selected – calibration continues from the point at which the
No
pressed.
once a stable and valid value is recorded.
Cal. Sensor A
frame – calibration advances to
A: Res 0.5 ohm
and continues.
frame – the display returns to the
A: Res 0.5 ohm
page.
key was