ABB AX413 User Manual page 20

...5 PROGRAMMING
...5.3 Configure Sensors
User
H2SO4
A: Analyser Type
HCl
set to NaCl
Cond
NaOH
KCl
Linear
None
-----
A: Temp.Comp.
10
Secs
A: Filter Time
Config. Sensor A
18
Temperature Compensation
Select the type of temperature compensation most suited to the application:
None
Linear
KCl
NaOH
NaCl
HCl
H2SO4
User
A: Temp.Comp.
A: Filter Time
A: Temp.Comp.
Temp. Coeff.
User Temp Comp A: Temp.Comp.
Filter Time
Set the required filter time, between 1 and 60 seconds in 1 second increments.
Sensor B configuration (dual input analyzers only) is identical to Sensor A
Config. Sensor B
configuration.
See Section 5.4
CONFIG. ALARMS
set to anything other than
Linear
set to – continued on next page.
Linear
set to – continued on next page.
User
or – continued below.
User