Adding A Mini Pci Card - Dell Latitude D400 User Manual

FILE LOCATION: S:\SYSTEMS\Pebble\UG\A00\English\r_r.fm
Connect the keyboard connector to the interface connector on the
1
system board.
Insert the five securing tabs on the keyboard into their respective slots
2
in the palm rest.
Replace the two screws at the top of the keyboard.
3
Replace the center control cover and snap it down so that it is flush
4
with the palm rest.

Adding a Mini PCI Card

If you ordered a Mini PCI card with your computer, the card is already
installed.
CAUTION: Before working inside your computer, read the safety
instructions in your
Ensure that the work surface is flat and clean to prevent scratching the
1
computer cover.
Save and close any open files, exit any open programs, and then shut
2
down the computer.
If the computer is connected to a docking device (docked), undock it.
3
See the documentation that came with your docking device for
instructions.
Disconnect the computer from the electrical outlet.
4
Wait 10 to 20 seconds, and then disconnect any attached devices.
5
Remove any installed PC Cards and the battery.
6
NOTICE: Handle components and cards by their edges, and avoid touching
pins and contacts. Ground yourself by touching a metal connector on the back
of the computer. Continue to ground yourself periodically during this
procedure.
Remove the keyboard.
7
If a Mini PCI card is not already installed, go to step 9. If you are
8
replacing a Mini PCI card, remove the existing card:
Disconnect the Mini PCI card from the attached cables.
a
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 / 2 9 / 0 3 – F O R P R O O F O N LY
System Information Guide .
Adding and Re placing Pa rts
165