Dell Latitude D400 User Manual page 164

FILE LOCATION: S:\SYSTEMS\Pebble\UG\A00\English\r_r.fm
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 / 2 9 / 0 3 – F O R P R O O F O N LY
162
Adding and Replacing Pa rts
If the computer is connected to a docking device (docked), undock it.
3
See the documentation that came with your docking device for
instructions.
Disconnect the computer from the electrical outlet.
4
Wait 10 to 20 seconds, and then disconnect any attached devices.
5
Remove any installed PC Cards and the battery.
6
NOTICE: Handle components and cards by their edges, and avoid touching
pins and contacts. Ground yourself by touching a metal connector on the back
of the computer. Continue to ground yourself periodically during this
procedure.
Turn the computer over, loosen the captive screws on the memory
7
module/modem cover, and then remove the cover.
1
If a modem is not already installed, go to step 9. If you are replacing a
8
modem, remove the existing modem:
Remove the screw securing the modem to the system board, and
a
set it aside.
Pull straight up on the attached pull-tab to lift the modem out of
b
its connector on the system board, and disconnect the modem
cable.
2