Adding A Modem - Dell Latitude D400 User Manual

FILE LOCATION: S:\SYSTEMS\Pebble\UG\A00\English\r_r.fm
Align the notch in the module edge connector with the tab in the
a
connector slot.
Slide the module firmly into the slot at a 45-degree angle, and
b
rotate the module down until it clicks into place. If you do not feel
the click, remove the module and reinstall it.
Insert the 3 securing tabs on the DIMM1 cover into the notches above
5
the memory module connector and tighten the captive screws.
NOTICE: If the DIMM1 cover is difficult to replace, remove the module and
reinstall it. Forcing the cover to close may damage your computer.
Replace the keyboard.
6
Insert the battery into the battery bay, or connect the AC adapter to
7
your computer and an electrical outlet.
Turn on the computer.
8
As the computer boots, it detects the additional memory and automatically
updates the system configuration information.
To confirm the amount of memory installed in the computer:
• In Windows XP, click the Start button, click Help and Support, and
then click Computer Information.
• In Windows 2000, right-click the My Computer icon on your desktop,
and then click the General tab.

Adding a Modem

If you ordered the optional modem at the same time that you ordered your
computer, Dell installed the modem for you.
CAUTION: Before working inside your computer, read the safety
information in your
NOTICE: Handle components and cards by their edges, and avoid touching
pins and contacts.
Ensure that the work surface is flat and clean to prevent scratching the
1
computer cover.
Save and close any open files, exit any open programs, and then shut
2
down the computer.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 / 2 9 / 0 3 – F O R P R O O F O N LY
System Information Guide
.
Adding and Re placing Pa rts
NOTE: If the memory
module is not installed
properly, the computer
may not boot properly. No
error message indicates
this failure.
161