Adding Memory - Dell Latitude D400 User Manual

Hide thumbs Also See for Latitude D400:
Table of Contents

Advertisement

FILE LOCATION: S:\SYSTEMS\Pebble\UG\A00\English\r_r.fm
NOTE: Memory modules
purchased from Dell are
covered under your
computer warranty.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 / 2 9 / 0 3 – F O R P R O O F O N LY
156
Adding and Replacing Pa rts

Adding Memory

You can increase your computer memory by installing memory modules on
the system board. See "Specifications" for information on the memory
supported by your computer. Install only memory modules that are
intended for your computer.
CAUTION: Before working inside your computer, read the safety
instructions in your
Ensure that the work surface is flat and clean to prevent scratching the
1
computer cover.
Save and close any open files, exit any open programs, and then shut
2
down the computer.
If the computer is connected to a docking device (docked), undock it.
3
See the documentation that came with your docking device for
instructions.
Disconnect the computer from the electrical outlet.
4
Wait 10 to 20 seconds, and then disconnect any attached devices.
5
Remove any installed PC Cards and the battery.
6
NOTICE: Handle components and cards by their edges, and avoid touching
pins and contacts. Ground yourself by touching a metal connector on the back
of the computer. Continue to ground yourself periodically during this
procedure.
Continue to the appropriate section:
7
"Installing a Memory Module Under the Memory Module/Modem
Cover"
"Installing a Memory Module Under the
Installing a Memory Module Under the Memory Module/Modem
Cover
Turn the computer over, loosen the captive screws on the memory
1
module/modem cover, and then remove the cover.
System Information Guide
Keyboard"
.

Advertisement

Table of Contents
loading

Table of Contents