Maintenance - Toro Workman 07390 Operator's Manual

Workman hdx-auto utility vehicle
Hide thumbs Also See for Workman 07390:
Table of Contents

Advertisement

Maintenance

Determine the left and right sides of the machine from the normal operating position.
Note:
Download a free copy of an Electrical Schematic or Hydraulic Schematic schematic by visiting
www.Toro.com and searching for your machine from the Manuals link on the home page.
CAUTION
Only qualified and authorized personnel should maintain, repair, adjust, or inspect the machine.
Avoid fire hazards and have fire protection equipment present in the work area. Do not use an
open flame to check level or leakage of fuel, battery electrolyte, or coolant. Do not use open
pans of fuel or flammable cleaning fluids for cleaning parts.
CAUTION
If you leave the key in the key switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the key switch before you do any maintenance.
CAUTION
Not properly maintaining the machine could damage the machine and/or cause injury to you
or bystanders.
Allow only qualified and authorized personnel to maintain, repair, adjust, and inspect the
machine.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 2 hours
After the first 10 hours
After the first 50 hours
Before each use or daily
Every 25 hours
Maintenance Procedure
• Torque the front and rear wheel nuts.
• Torque the front and rear wheel nuts.
• Check the adjustment of the parking brake.
• Replace the hydraulic filter.
• Change the engine oil and filter.
• Inspect the opening on the filter.
• Check the transmission-fluid level.
• Check the engine-oil level. (Check the oil level before and after the engine is first
started and daily thereafter.)
• Check the hydraulic-fluid level. (Check the level of hydraulic fluid before the engine
is first started and daily thereafter.)
• Check the level of the coolant. Check the Coolant level at the overflow reservoir
only. Do not remove the radiator cap. (Check the coolant level before the engine is
first started and daily thereafter.)
• Check the brake-fluid level. (Check the level before the engine is first started and
daily thereafter.)
• Check the oil-pressure-warning light.
• Check the tire pressure.
• Remove debris from the engine area and radiator. (Clean it more frequently in
dirty conditions.)
• Check the operation of the safety-interlock system.
• Remove the air-cleaner cover and clean out the debris.
38

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workman 07390tcWorkman 07390h

Table of Contents