Product Overview - Toro Workman 07390 Operator's Manual

Product Overview

Controls
Note:
Determine the left and right sides of the
machine from the normal operating position.
Accelerator Pedal
Use the accelerator pedal
speed of the machine when the transmission is in
gear. Pressing down the accelerator pedal increases
the engine speed and ground speed. Releasing the
pedal decreases the engine speed and ground speed.
1. Brake pedal
Brake Pedal
Use the brake pedal to stop or slow the machine
(Figure 8).
CAUTION
Operating a machine with worn or incorrectly
adjusted brakes can may result in personal
injury.
If the brake pedal travels to within 25 mm (1
inch) of the machine floor board, adjust or
repair the brakes.
(Figure 8) to vary the ground
Figure 8
2. Accelerator pedal
Transmission Lever
Use the transmission lever
transmission between P (
( ), L (
NEUTRAL LOW FORWARD
operation.
Important:
Do not shift the transmission to the
R , L , or D
EVERSE OW
is motionless and the engine is at low idle;
otherwise, you could damage the transmission.
1. Transmission lever
g024307
2. P (park)
3. R (reverse)
18
(Figure 9) to shift the
), R (
PARK REVERSE
), and D (
DRIVE
gear unless the machine
RIVE
Figure 9
4. N (neutral)
5. L (low forward)
6. D (drive)
), N
) ground
g028609