STEP 11
Seat Bottom & Cylindrical Cushion Installation (Cont.)
(a) First, remove screws (55) from the seat bottom (A30) and then remove
screws (56) (57) from the seat frame (A21).
(b) Use screws (55) (56) to secure the seat bottom (A30) and the cylindrical
cushion arm (A27) to the seat frame (A31).
(c) Put the cylindrical cushion (A32) in place on both sides of the seat frame
(A31) as shown, and then secure them with the axle cover (41) and screws
(57). Finally, put the round sticker (19) in place as shown.
(a)
(b)
(c)
33