Table of Contents
Advertisement
STEP 2
Weight Stack Installation (Continued)
Follow instructions (a) through (g) to install the weight stack.
(a) Hold the upper stack carriage set (32), and then cut the zip tie. Gently
lower the upper stack carriage set (32) into place as shown.
(b) Remove screws (33) (34). Set the guide rod (35) downward into place
as shown.
(c) Tilt the guide rod (35) backward and then lift the upper stack carriage
set (32) off the guide rods as shown. Carefully set the upper stack
carriage set (32) aside.
(a)
(b)
15
(c)
Advertisement
Table of Contents
