Step 10 Lower Cable Adjustment - SPORTS ART DF-206 Owner's Manual

STEP 10 Lower Cable Adjustment
Insert the stack fork (A6) into the gap under the lowest weight plate and then
adjust the nut at area D until the upper stack carriage moves slightly.
To adjust the cable, first insert an open end wrench into (Z) hole. Loosen (Y)
nut and then adjust (X) nut. If the cable is too long, adjust (X) nut downward.
If too short, adjust (X) nut upward. After adjusting (X) nut, tighten (Y) nut
against the weight stack to secure this position.
31