Table of Contents
Advertisement
STEP 2
Weight Stack Installation (Continued)
(d) Remove screws (36) from the stack fork (A6) and insert the weight stack
rod (A7) into the central mounting position of the upper stack carriage
set (32). Use screws (36) to secure the stack fork (A6) into place of the
upper stack carriage set (32) as shown.
(Note: Remove the stack fork first before assembling.)
(e) Remove screws (37) from the set fork (38) to remove the bolt assy.
crossover (39). Pull the cable from the stack fork (A6) to thread through
the bolt assy. crossover (39) as shown. Secure the bolt assy. crossover
(39) back into place of the set fork (38) with screws (37) as shown.
(d)
16
(e)
Advertisement
Table of Contents
