Rinse Aid - Miele PG 8080 Operating Instructions Manual

Settings menu

Rinse aid

You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set in
steps of approx. 0-6 ml.
The factory default setting is 3 ml.
If spots appear on crockery and
glassware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
 Select the desired amount of rinse aid
and press the middle button to
confirm.
72
AutoOpen
To help the drying process, the door
automatically opens a little at the end of
a programme, (except for "Pre-wash",
"Short" and "Beer glasses"). See the
Programme chart.
With the Medium, Intensive and
Glasses programmes, AutoOpen can
only be activated by selecting the
Additional drying function (see
"Additional functions, Additional
drying").
With the ECO programme the door
opens during the drying phase.
This function can be deactivated if
wished.
 Select the desired setting and press
the middle button to confirm.

If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the programme, make
sure that you open the door fully.
Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.