Refill Reminders - Miele PG 8080 Operating Instructions Manual

Settings menu

Refill reminders

You can switch off the reminders to
replenish salt and rinse aid so that
the dishwasher will go into Standby
despite a lack of salt or rinse aid.
You cannot switch off fault
messages.
If you want the dishwasher to switch to
Standby mode in spite of the Refill
reminders, you can switch both
indicator lights off.
 Select the desired setting and press
the middle button to confirm.
Brightness
There are seven different display
brightness settings.
 Select the level of brightness you
want and press the middle button to
confirm.
Contrast
There are seven different display
contrast settings.
 Select the contrast setting you want
and press the middle button to
confirm.
74
Check filters
You can adjust the interval at which the
reminder to check the filters appears.
You can set an interval of between 30
and 60 programme cycles.
The "Check filters" message is set at
the factory to appear after every 50
programme cycles.
This function can be deactivated if
wished.
 Select the desired setting and press
the middle button to confirm.
External DOS
Activate automatic dispensing of liquid
detergent if you have installed the
optional external dosing module.
The DOS module is supplied with its
own installation instructions.
 Select the desired setting and press
the middle button to confirm.
The setting will remain active until
you deactivate the "External
dispenser" option.