Table of Contents
Advertisement
SuperServer E200-9A User's Manual
Physical Presence Spec Version
Use this feature to select the PPI spec version. The options are 1.2 and 1.3.
Device Select
Use this feature to select the TPM version. TPM 1.2 will restrict support to TPM 1.2 devices.
TPM 2.0 will restrict support for TPM 2.0 devices. Select Auto to enable support for both
versions. The default setting is Auto.
iSCSI Configuration
iSCSI Initiator Name
This feature allows the user to enter the unique name of the iSCSI Initiator in IQN format.
Once the name of the iSCSI Initiator is entered into the system, configure the proper settings
for the following items.
Add an Attempt
Delete Attempts
Change Attempt Order
Intel Ethernet Connection X553 1GbE - 0C:C4:7A:XX:XX:XX
Intel Ethernet Connection X553 1GbE - 0C:C4:7A:XX:XX:XX
Intel Ethernet Connection X553 1GbE - 0C:C4:7A:XX:XX:XX
Intel Ethernet Connection X553 1GbE - 0C:C4:7A:XX:XX:XX
These items display the following information :
NIC Configuration
Link Speed
Use this feature to change the link speed and duplex for the current port. The options are
Auto Negotiated, 10Mbps Half, 10Mbps Full, 100Mbps Half, and 100Mbps full.
Wake On LAN
Select enabled to wake the system with a magic packet. The options are Enabled and
Disabled.
Blink LEDs
This feature allows the user to specify the duration for LEDs to blink. The range is from 0 ~
15 seconds. The default setting is 0.
66
Advertisement
Table of Contents
