Supermicro SuperServer E200-9A User Manual page 80

SuperServer E200-9A User's Manual
Default Options
Restore Optimized Defaults
To set this feature, select Restore Optimized Defaults and press <Enter>. These are factory
settings designed for maximum system performance but not for maximum stability.
Save as User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press <Enter>. This
enables the user to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press <Enter>. Use
this feature to retrieve user-defined settings that were saved previously.
Boot Override
This feature allows the user to override the Boot Option Priorities sequence in the Boot menu
and immediately boot the system with another device specified by the user. This is a one-
time override.
UEFI: Built-in EFI Shell
UEFI: PXE IP4 Intel Ethernet Connection X553 1GbE
UEFI: PXE IP4 Intel Ethernet Connection X553 1GbE
UEFI: PXE IP4 Intel Ethernet Connection X553 1GbE
UEFI: PXE IP4 Intel Ethernet Connection X553 1GbE
80