Supermicro SuperServer E200-9A User Manual page 37

SMBus to PCI Slots
Jumpers JI C1 and JI
2 2
PCI-E slots. Both jumpers must be set to the same setting (JI
controls the data). The default setting is Disabled.
LAN Enable/Disable
Use jumper JPL1 to enable or disable the four LAN ports.
C2 allow you to connect the System Management Bus (I
SMBus to PCI Slots
Jumper Settings
JI C1 Setting JI C2 Setting
2 2
JI C1: Pins 1-2 JI C2: Pins 1-2
2 2
JI C1: Pins 2-3 JI C2: Pins 2-3
2 2
LAN Port Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
37
Chapter 3 Motherboard Connections
C1 controls the clock and JI
2
Definition
Enabled
Disabled (Default)
C) to the
2
C2
2