Supermicro SuperServer E200-9A User Manual page 64

SuperServer E200-9A User's Manual
Trusted Computing (Available when a TPM device is installed

and detected by the BIOS)
*The features from here to Current Status Information are displayed if a TPM module
is detected:
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled, onboard
security devices will be enabled for TPM support to enhance data integrity and network
security. Please reboot the system for a change on this setting to take effect. The options
are Disable and Enable.
TPM State
Select Enabled to use TPM (Trusted Platform Module) settings to enhance system data
security. Please reboot your system for any change on the TPM state to take effect. The
options are Disable and Enable.
Pending operation
Use this item to schedule a TPM-related operation to be performed by a security device for
system data integrity. Your system will reboot to carry out a pending TPM operation. The
options are None and TPM Clear.
Note: Your system will reboot to carry out a pending TPM operation.
Device Select
Use this feature to select the TPM version. TPM 1.2 will restrict support to TPM 1.2 devices.
TPM 2.0 will restrict support for TPM 2.0 devices. Select Auto to enable support for both
versions. The default setting is Auto.
Current Status Information
This item displays the status of the TPM support on this motherboard.
•
TPM Enabled Status
•
TPM Active Status
•
TPM Owner Status
*The features from here to Device Select on the next page are displayed if a TPM 2.0
module is detected:
TPM20 Device Found
Vendor: IFX
Firmware Version: 5.51
64