Cleaning The Housing - Miele B 3312 Operating Instructions Manual

Cleaning and care
 Now set the temperature selector on
the iron to the highest temperature
setting .
The indicator light on the temperature
selector will light up yellow whilst the
iron is heating up.
Useful tip: During the heating-up
phase, you can set down the iron on
the designated surface on the steam
ironing system.
As soon as the indicator light goes out,
the rinsing process is complete.
 Remove drops of water and deposits
from the soleplate by moving the iron
over a soft, absorbent cotton cloth
while it is still hot. Press the  steam
button briefly 2-3 times in the
process.
The descaling process is now
complete. The steam ironing system
can now be switched off or used.
58

Cleaning the housing


Before cleaning the housing,
switch off at the socket and
withdraw the plug.
Depending on the level of soiling, use a
dry or moist soft cloth to wipe the
housing.
Do not use abrasive cleaning agents.
Cleaning the soleplate of the
iron

The soleplate of the iron remains
hot after ironing.
Danger of burning!
Switch off at the wall socket and
withdraw the plug. Let the soleplate
of the iron cool down before you
start the cleaning process.
 Depending on the level of soiling, use
a dry or moist microfibre cloth to
clean the iron soleplate.
Only use the microfibre cloth to clean
the iron soleplate!