Rinse water container and fill to
the mark
Remove the water container from the
tower.
As long as the water container is not
fitted in the tower, the display will show
the following message
container
.
Open the screw cap.
Rinse the water container thoroughly.
Make sure no residues of the
descaling tablet remain in the water
container.
Fill the water container with fresh tap
water at least up to the level mark.
Close the screw cap.
Fit the water container back in the
tower.
Empty drawer
Remove the residual water drawer
The message
in the display.
Empty the residual water drawer.
Fit water
Slide the residual water drawer back
Cleaning and care
from the tower.
Fit drawer
into the tower until it clicks into place.
will appear
55