Steamer - Miele B 3312 Operating Instructions Manual

The B 3847 steam ironing system is
equipped with a steamer in addition to
the iron. The steamer is available as
an optional accessory for the B 3312
and B 3826 steam ironing systems.
The steamer  makes ironing hanging
garments easier, e.g. dresses and
jackets. It comes with a removable
brush attachment  for lifting the
fibres.
The steamer weighs less than the iron
and also does not have a hot soleplate,
therefore eliminating the risk of shiny
patches if it accidentally comes into
contact with the fabric.
The steamer can also be used when the
appliance is folded up.
The steamer supplied with earlier
steam ironing systems (B 1xxx/B 2xxx)
cannot be used with this appliance.
Connecting the steamer
You can also plug the steamer into the
steam connection socket of the
ironing system as an alternative to the
iron.
Disconnecting the iron from the
steam connection socket

The iron soleplate is still very hot
after use!
Avoid direct contact.
Place the iron on its resting surface
and let it cool down completely
before you store it away.
Do not pull on the steam hose.
Always pull on the plug at the end of
the steam hose when disconnecting
it from the steam connection socket.
 Pull back the sliding switch located
on the side of the steam hose plug.
 Hold back the sliding switch.
 Withdraw the plug from the steam
connection socket.

Steamer

39