Switching on
Switching on the steam ironing
system
Press the button on the control
panel of the tower to switch on the
steam ironing system.
The button lights up and the
Welcome screen appears for several
seconds in the display.
If the iron was not connected to the
steam connection before switching it
on, the message
displayed. In this case, the steam hose
must be attached to the steam
connection (see "Connecting").
If the steam button on the iron is
locked when the steam ironing system
is switched on,
will appear in the display. If this is the
case, first unlock the steam button by
pushing the slider on the iron forwards
(see "Ironing").
The message
appears in the display. The steam
ironing system starts to heat up. During
the heating-up phase, some steam may
be discharged from the iron.
As soon as the steam ironing system is
ready and steam is available, the
message
Ready for use
displayed.
28
Attach hose
is
Release stm. button
Heating-up phase
will be
Depending on the operating duration,
immediately after switching the
steam ironing system on, the
automatic rinse function can be
started (see "Automatic rinsing") or
you may be prompted to start the
descaling process (see "Descaling").
The steam ironing system is not
available for ironing while the rinse or
descaling process is running.
then