Miele B 3312 Operating Instructions Manual page 8

Warning and Safety instructions
Technical safety

Before setting up the steam ironing system, inspect it visually for
any external damage. Never use a damaged steam ironing system. A
damaged steam ironing system can be dangerous.

Check the iron of the steam ironing system for damage. Do not
use the iron if it has been dropped, if there is any visible damage or if
it is leaking.

Before connecting the steam ironing system to the mains
electricity supply, make sure that the connection data on the data
plate (voltage and frequency) matches the mains electricity supply.
Connection to a supply voltage other than the one quoted on the
data plate can lead to functional faults and damage to the steam
ironing system. If in doubt, contact a suitably qualified electrician.

Always remove and unwind the mains connection cable of the
steam ironing system completely from its (lower) storage
compartment.

If the mains connection cable is damaged, it must be replaced
with a special cable of the same type (available from Miele). For
safety reasons, this must only be fitted by a Miele service technician.

Do not use the steam ironing system if the ironing board cover is
damaged.
A damaged ironing board cover could be dangerous.
Do not use the steam ironing system without an ironing board
cover.
The ironing board cover must be replaced with an original Miele
cover.
8