Connecting A Dc Power Cable - HP FlexFabric 11908-V Installation Manual

3. Plug the other end of the power cable to the AC power receptacle of the power source and switch
on the circuit breaker.
4. Verify the power supply input status LED.
If the LED is on, the power cable is correctly connected. For description of power supply status LEDs,
see "Appendix C
Figure 22 Securing the power cable

Connecting a DC power cable

WARNING!
• Make sure each power cable has a separate circuit breaker.
Before you connect the power cable, make sure the circuit breaker on the power cable is switched off.
•
Make sure the circuit breaker at the power input end is off when you connect the DC power cable to the
•
terminals on the power source.
To connect a DC power cable:
1. Plug the power cable into the power receptacle of the power supply.
2. Fasten the screw to secure the power cable.
LEDs."
27