Table of Contents
Advertisement
4.
Connect the fiber to the module. For the installation procedure,
network."
Figure 24 Installing an SFP+/SFP/QSFP+ module
Connecting an SFP+/QSFP+/QSFP+ to SFP+ cable
Use SFP+ cables to connect SFP+ ports, QSFP+ cables to connect QSFP+ ports, and QSFP+ to SFP+
cables to connect QSFP+ and SFP+ ports. All these cables are hot swappable.
To connect an SFP+, QSFP+, or QSFP+ to SFP+ cable:
1.
Wear an ESD wrist strap and make sure it makes good skin contact and is well grounded. For
more information, see
2.
Unpack the cable.
3.
Plug the cable connector into the port. Make sure the cable connector is the right side up.
The bend radius of the cable must be at least eight times the cable diameter.
"Attaching an ESD wrist
29
"Connecting your switch to the
strap."
Advertisement
Table of Contents
Troubleshooting
