Rear Panel - HIKVISION Blazer Express 16 Quick Start Manual

Rear Panel

Notes:
 PoE interface is only available for Blazer Express/16/8P, Blazer Express/16/16P,
and Blazer Express/32/16P. For Blazer Express/16/16P, and Blazer
Express/32/16P, there are 16 PoE interfaces available on the rear panel.
 12 VDC power input is available for Blazer Express/16. 100 to 240 VAC power
input is available for Blazer Express/16/8P, and Blazer Express/16/16P. 110 to
220 VAC power input is available for Blazer Express/32, and Blazer
Express/32/16P.
 Power switch is available for Blazer Express/16/8P, Blazer Express/16/16P,
Blazer Express/32, and Blazer Express/32/16P.
No. Item
1 PoE Interface
ALARM IN
2
ALARM OUT
3 LAN Interface
4 USB Interface
TM
5 HDMI
6 RS-232 Interface
7 VGA
8 AUDIO IN
9 AUDIO OUT
10 GND
11 Power Supply
12 Power Switch
Quick Start Guide of Blazer Express Station
Description
Network interfaces for the cameras and to
provide power over Ethernet.
Connector for alarm input.
Connector for alarm output.
LAN network interfaces.
Universal Serial Bus (USB) ports for additional
devices such as USB mouse and USB Hard Disk
Drive (HDD).
Left: USB 3.0, Right: USB 2.0
TM
HDMI video output connector. The HDMI
interfaces can also be used for video wall
display.
Connector for RS-232 devices.
Connector for VGA output. Display local video
output and menu.
RCA connector for audio input.
RCA connector for audio output.
Ground.
Power supply.
Power on/off switch.
4
TM