Adding Devices By Ip Address - HIKVISION Blazer Express 16 Quick Start Manual

device and the recording task will automatically perform according to
schedule.
For adding multiple devices:
 User Name: Input the user name of the devices.
 Password: Input the password of the devices.
Note: The password strength of the devices can be checked by the system.
For your privacy, we strongly recommend changing the password to
something of your own choosing (using a minimum of 8 characters,
including upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product.
 (Optional) Set the Add Camera to Area switch to ON to export the cameras
of the devices to an area. You can create a new area by the device name,
select an existing area, or customize a new area.
Note: If you do not export cameras to area, you cannot perform the live view,
playback, event settings, etc., for the cameras.
 (Optional) After adding cameras to area, you can check Synchronize
Camera Name checkbox to get the camera name from the devices.
 Select recording schedule template to set the recording schedule for the
device and the recording task will automatically perform according to
schedule.
5. Click OK to confirm adding the cameras.

Adding Devices by IP Address

Steps:
1. Click Physical View and enter Encoding Device.
2. Click Add.
3. Select IP Address as the adding mode.
4. Input the required information.
 Manufacturer: Select the manufacturer of the device.
 Device Address: Input the IP address of the device.
 Device Port: Input the port No. of the device. By default, it's 8000.
 Alias: Create a name for the device.
 User Name: Input the user name of the device.
 Password: Input the password of the device.
Note: The password strength of the device can be checked by the system. For your
privacy, we strongly recommend changing the password to something of your own
choosing (using a minimum of 8 characters, including upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of
your product.
5. If the added device is an automatic number plate recognition (ANPR) camera, you
can check Added as ANPR Unit checkbox.
Note: Up to four cameras can be added as ANPR unit for viewing the license plate
and vehicle information recognized by the camera via Control Client (for details,
refer to User Manual of Blazer Express Control Client).
Quick Start Guide of Blazer Express Station
15