Blazer Express Startup Wizard; Os Password Settings - HIKVISION Blazer Express 16 Quick Start Manual

Blazer Express Startup Wizard

After startup, the Blazer Express Startup Wizard pops up, and you can set the
operating system's password, network parameters, time zone, and time.
Before you start:
The video output should be connected to a display unit. You also have to connect a
USB mouse and USB keyboard via the available USB interface before you can
properly configure the system.

OS Password Settings

Select Keep Current Password to keep the default password. You can also change
the operating system's password if necessary.
The default user name and password of Blazer Express's operating system are
Note:
as follows:
User Name: admin
Password: Abc12345
 You can change this default OS password to better protect against security
risks, such as the unauthorized access by others to the product that may
prevent the product from functioning properly and/or lead to other
undesirable consequences.
 For your privacy, we strongly recommend changing the password to
something of your own choosing (using a minimum of 8 characters,
including upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product.
 Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
To change the operating system's password, select Change OS Password, input the
new password and confirm password.
Note: Remember your new OS password after changing the password.
Click OK to continue.
Quick Start Guide of Blazer Express Station
9