Peripheral Connections; Wiring Of Alarm Input - HIKVISION Blazer Express 16 Quick Start Manual

4. Connect the power cord to the HDD.
5. Repeat the above steps to install other hard disks onto the Blazer Express. After
having finished the installation of all hard disks, re-install the cover and fasten
screws.

Peripheral Connections

Wiring of Alarm Input

The alarm input is an open/closed relay. To connect the alarm input to the device, use
the following diagram.
Notes:
 If the alarm input is not an open/close relay, please connect an external relay
between the alarm input and the device.
 The following figures only for reference, subject to the actual device.
Quick Start Guide of Blazer Express Station
7