Table of Contents
Advertisement
allocated to a camera.
2. Click Initialize and select a disk to initialize in the pop-up dialog so that you can
store the videos and pictures on the HDDs.
Note:
Initializing the HDD will erase all data on it.
3. Click Edit to list all the added cameras.
4. In the Used Space column, set the storage space allocated to the camera, and by
default, the video and picture quota will be set automatically and the proportion
of video quota to picture quota is four to one. You can edit the video quota and
picture quota as desired. After setting the video quota, the estimated recording
time shows which is calculated based on all-day recording.
Note:
The cameras with no quota allocated will use the free quota for video and
picture storage.
5. Click Save to confirm the settings.
Live View
After adding the devices and managing the area, you can live view the camera via
Control Client which is a C/S software providing multiple operating functionalities.
Note:
Here we only introduce the access to the station via the Control Client installed
on the Blazer Express. You can also install the Control Client on your PC for
accessing the Blazer Express via network. For more details, refer to the User Manual
of Blazer Express Control Client.
Login via Control Client
Steps:
1. Click on Control Client panel on the desktop to run the Control Client.
2. Input the IP address and port No. of the Blazer Express.
To login the current Blazer Express, input localhost in IP Address field.
You can click Show Server Address to show the parameters panel.
3. Input the user name and password of the Blazer Express.
Note:
For the first time login of admin user, you are required to create the
password on Web Client. Refer to Accessing Blazer Express via Web Client.
4. (Optional) Check the checkbox Remember Password to keep the password.
5. (Optional) Check the checkbox Enable Auto-login to log into the software
automatically.
6. Click Login to enter the Control Client.
Notes:
If failed password attempt of current user is detected, you are required to
input the verification code before you can log in. The failed password attempt
from current client, other client and other address will all require the
verification code.
The failed password attempt from current client, other client (e.g., Control
Client) and other address will all be accumulated. Your IP address will be
locked for a specified period of time after specific number of failed password
or verification code attempts. For detailed settings of failed login attempts
and locking duration, refer to the User Manual of Blazer Express Web Client
(Security).
Quick Start Guide of Blazer Express Station
17
Advertisement
Table of Contents
