Table of Contents
Advertisement
I
S
S
NSTALL THE
ERVER
TEP
Policy Settings
64
9: S
SWG
ET UP AN
TO USE WITH THIS
• Connection Method: Select "SFTP" from the pull-down menu.
• Archive Location: Type in the IP address of this SR appended by a slash
character ( / ) and the word 'incoming'. For example: 200.260.10.56/
incoming for an SR with that IP address.
• User Name: Type in the SWG's Username from the Device Registry, which is
swg (in lower case characters).
• Password: Type in the password you entered for the SWG in the Device
Registry.
NOTE: Be sure "Extended Format" is selected for Archive format, and the Log Archive
Scheduling frame specifies the correct interval you wish to use for sending logs from the
SWG to the SR.
G. Click Save to save your settings.
A. Navigate to Policies > Default Policy Settings and verify if the settings in the
Enable Emergency Policy frame and Default Policy Values frame are the ones
you wish to use for sending logs to the SR.
B. To modify any settings, click Edit to activate all elements in this panel:
C. Make your selections from the pull-down menu(s).
D. Click Save to save your edit(s).
WFR
M86 S
I
G
ECURITY
NSTALLATION
UIDE
Advertisement
Table of Contents
