Step B: Generate A Report For A Custom User Group - M86 Security 350 Installation Manual

B F R
EST ILTERING AND EPORTING

Step B: Generate a report for a custom User Group

100
P R M
RACTICES EPORT
3. Type in the Group Name and check the box(es) corresponding to "Patterns",
"IP Ranges", and/or "Single Users/Exclude" to activate the frames in the section
below. For this example, select "IP Ranges".
4. Specify criteria for the group. In this example, enter an IP address within the
range of the parent group.
5. Click Save to save your settings and to return to the User Groups panel. Note
the group you added now displays in the User Groups list.
In the WFR User Guide index, see:
• How to: add a user group
Once the custom User Group is recognized by the SR (on the following day),
reports can be generated.
There are two ways to generate a summary or detail report for a custom User
Group. You can use the Reports > Drill Down Reports > Report Wizard option,
or you can use the Reports > Drill Down Reports > User Groups option.
• Report Wizard - In the Report Wizard panel:
1. Specify "Summary Report" or "Detail Report". For a summary report, choose
the report Type for the results (Categories, IPs, Users, Sites, Category
Groups).
2. Select the User Group name from the "By User Group" accordion, and then
click Run to generate the report.
Once the report view displays in the panel, click Export Selected for a
summary report or Export All for a detail report, and then click Download to
generate the report in the PDF format.
• Drill Down Reports > User Groups - In the Drill Down Reports > User Groups
panel the list of user groups displays.
1. For a summary report, select only the user group you wish to use by clicking
the first column for that record. For a detail report, select only the user group
you wish to use, and then click the Page Count or Object Count link.
2. Once the report view displays in the panel, click Export Selected for a
summary report or Export All for a detail report, and then click Download to
generate the report in the PDF format.
In the WFR User Guide index, see:
• How to: use the Report Wizard to generate a report
• How to: generate a Drill Down Report
U S
ANAGER SAGE CENARIOS
M86 S I G
ECURITY NSTALLATION UIDE