Table of Contents
Advertisement
I
S
S
NSTALL THE
ERVER
TEP
M86 menu
WF Filter Mode
28
1B: LCD P
S
P
ANEL
ETUP
ROCEDURES
When the M86 menu option is selected from the LCD Menu tree, the following
menu items display in the panel, the entire list which is viewable by using the navi-
gation keys:
• WFR Patch Level >
• Serial Number >
• WF Filter Mode > *
• IP / LAN1 > *
• IP / LAN2 > *
• Gateway > *
• DNS 1 > *
• DNS 2 > *
• Host Name > *
• Regional Setting (Time Zone, date, time) *
• Configure Setup Wizard User *
• Reset Admin Account
• Reboot >
• Shutdown >
NOTES: When using the M86 menu to execute quick start setup procedures, be sure to
configure all menu items marked in the list above with an asterisk ( * ).
Please make a note of the LAN 1 and LAN 2 IP address and host name you assign to the
WFR server, as well as the username and password you create for logging into the "Setup
Wizard" (Security Reporter Wizard user interface), as you will need to use this information
in later steps of the installation procedure.
TIPS: Navigation tips in the M86 menu:
• Use the up / down (arrow) key to scroll up / down the menu
• Press the checkmark / ENTER key to choose the current selection
• Press the "X" / CANCEL key to go back to the previous screen
Make a selection from the menu, and press the checkmark / ENTER key to go to
that screen.
When the WF Filter Mode option is selected, the WF Filter Mode screen displays.
A. At the Mode field, use the left / right arrow keys to view and choose from the
available options: Invisible, Router, Firewall.
B. Press the checkmark / ENTER key to go to the Save Changes screen.
C. On the Save Changes screen:
• Choose Yes to accept your changes and to return to the main menu.
• Choose No to return to the Mode field.
M86 S
I
G
ECURITY
NSTALLATION
UIDE
Advertisement
Table of Contents
