Install The Server; Step 1: Setup Procedures; Quick Start Setup Requirements; Lcd Panel Setup Requirements - M86 Security 350 Installation Manual

I
NSTALL THE

Step 1: Setup Procedures

This step requires you to set up parameters for the WFR to function on the
network. You have the option of using the text-based Quick Start setup procedures
described in Step 1A, or the LCD panel setup procedures described in Step 1B.

Quick Start Setup Requirements

A. The following hardware is required for the Quick Start setup procedures:
• WFR with AC power cord(s) *
• either one of two options:
• PC monitor with AC power cord * and keyboard, or
• PC laptop computer with HyperTerminal ** and serial port cable (and USB
B. Go to Step 1A to execute Quick Start Setup Procedures.
NOTE:
* For 300 series models, the power adapter supplied with the power cord must
also be used
** If using a Windows Vista or Windows 7 laptop, please be sure HyperTerminal or
an equivalent terminal emulator program is installed on your machine. See the
note under HyperTerminal Setup Procedures if selecting this option.

LCD Panel Setup Requirements

A. The following hardware is required for LCD panel setup procedures:
• WFR with AC power cord(s) *
B. Go to Step 1B to execute LCD Panel Setup Procedures.
NOTE:
* For 300 series models, the power adapter supplied with the power cord must
also be used
M86 S I G
ECURITY NSTALLATION UIDE
S
ERVER
DB9 serial adapter, if there is no serial port on your laptop)
I S S 1: S
NSTALL THE ERVER TEP
P
ETUP ROCEDURES
15