Table of Contents
Advertisement
D. Enter the Password this SR will use for communicating with this SWG and any
other SWG subsequently added to the device registry. Make this same entry
again in the Confirm Password field.
E. Click Save to save and process your information, and to return to the Device
Registry panel where an icon representing the SWG device you added now
displays.
SWG Log Transfer Setup
Setup instructions differ depending on the SWG software version to be used with
the SR (10.0 or 9.2.5).
IMPORTANT: If this SR being configured will be receiving logs from multiple SWG policy
servers, please note that each policy server will be sending logs to the same directory in
the SR. Additionally, in such a configuration (with multiple policy servers sending logs to
one SR), a known issue exists in which SR reports may be inaccurate. M86 Security is
planning to resolve this issue in the next software release. In the interim, M86 recom-
mends backing up archive logs and textmaps from each policy server, and then re-
importing this data after applying the software update that contains this fix.
SWG Configuration for Software Version 10.0
Configure SWG to Send Logs to the SR
A. Access the SWG user interface.
B. Navigate to Administration > System Settings > M86 Devices.
C. In the Devices tree, find the SWG's IP address and drill down to Log Server >
Log Properties.
D. In the Log Properties panel, click the Log Archiving tab:
E. Click Edit to activate the elements in this tab.
F. In the Log Archiving Location frame, click the '+' (plus character) in the table
header to add a new row in the table, and specify the following criteria to the
right of the checkmark in the Enable column:
M86 S
I
G
ECURITY
NSTALLATION
UIDE
I
S
S
9: S
NSTALL THE
ERVER
TEP
SWG
ET UP AN
TO USE WITH THIS
WFR
63
Advertisement
Table of Contents
