Map The Wfr's Ip Address To The Server's Host Name - M86 Security 350 Installation Manual

I S S
NSTALL THE ERVER TEP

Map the WFR's IP Address to the Server's Host Name

50
4: G SSL C
ENERATE ERTIFICATE
F. Refresh the current Web page by pressing the F5 key on your keyboard.
G. Follow steps A to K documented in Windows XP or Vista with IE 8 or 9:
• When the security issue page re-displays with the message: "There is a
problem with this website's security certificate.", click Continue to this
website (not recommended) (see Figure A1). Choosing this option displays
the WFR Welcome window with the address field and the Certificate Error
button to the right of the field shaded a reddish color (see Figure A2).
• Click Certificate Error to open the Certificate Invalid box (see Figure B).
• Click View certificates to open the Certificate window that includes the host
name you assigned to the WFR (see Figure C).
• Click Install Certificate... to launch the Certificate Import Wizard (see Figure
D).
• Click Next > to display the Certificate Store page (see Figure E).
• Choose the option "Place all certificates in the following store" and then click
Browse... to open the Select Certificate Store box (see Figure F).
• Choose "Trusted Root Certification Authorities" and then click OK to close the
box.
• Click Next > to display the last page of the wizard (see Figure G).
• Click Finish to close the wizard and to open the Security Warning dialog box
asking if you wish to install the certificate (see Figure H).
• Click Yes to install the certificate and to close the dialog box. When the certif-
icate is installed, the alert window opens to inform you the certificate installa-
tion process has been completed (see Figure I).
• Click OK to close the alert box, and then close the Certificate window.
H. From the toolbar of your browser, select Tools > Internet Options to open the
Internet Options box.
I. Select the Security tab, click Trusted sites, and then click Sites to open the
Trusted sites box.
J. Select the URL you just added, click Remove, and then click Close.
Now that the security certificate is installed, you will need to map the WFR's IP
address to its host name. Proceed to Map the WFR's IP Address to the Server's
Host Name.
A. From your workstation, launch Windows Explorer and enter
C:\WINDOWS\system32\drivers\etc in the Address field to open the folder
where the hosts file is located:
M86 S I G
ECURITY NSTALLATION UIDE