Chapter 4
Wall Mounting
The product ships with wall mounting kit. To mount your
product on the wall, follow the instructions below:
1.
First make a hole for the anchor in the surface on the
wall.
2.
Then press the anchor into the hole until it is flush with
the surface. You may need a hammer to tap the wall
anchor.
3.
Use a screwdriver to screw the threaded screw into the
plastic anchor.
4.
Attach the wall mounting bracket to the back of the
device, securing it in place with four of the flat-head
screws provided.
5.
Hang the device on the wall.
Unit: mm
Embedded and Industrial Computing
Hardware Setup
20