Maintenance And Inspection - Sanwa DCM2000DR Instruction Manual

[6] MAINTENANCE
1. The following instructions are very important for safety.
Read this manual thoroughly to ensure correct maintenance.
2. Calibrate and inspect the meter at least once a year to ensure
safety and maintain its accuracy.

6-1 Maintenance and Inspection

1) Appearance: Is the meter not damaged due to falling or
other cause?
2) Test leads:
6-2 Calibration and Inspection
See section 7-3.
6-3 Storage
1. The panel and case are not resistant to volatile solvent and must
not be cleaned with thinner or alcohol.
2. The panel and case are not resistant to heat. Do not place the
meter near heat-generating devices.
3. Do not store the meter in a place where it may be subjected to
vibration or where it may fall.
cold or humid places or places where condensation is
anticipated.
batteries.
WARNING
CAUTION
— 22 —