Sanwa DCM2000DR Instruction Manual page 15

AC
Notes:
The fixed function can be selected with the
auto identification mode can be confirmed with [
main value display when there is no input signal.
When the
range are fixed and the instrument is put to the manual range
mode ( extinguished).
The range can be switched by pressing the button again.
Holding the button depressed for more than 1 sec. lights
is still fixed.
Auto identification is disabled in the manual range and fixed
switched automatically to the voltage function even when a
voltage is input.
DC
button is pressed once while a measurement
— 13 —
button. The
] lit on the