Checking And Cleaning The Print Head - Windows; Checking And Cleaning The Print Head - Mac Os; Running Power Cleaning - Epson ET-2700 Series User Manual

User's Guide
y
5. Hold the button down for three seconds until the power light starts flashing.
Print head cleaning starts.
Note:
It may take some time to start print head cleaning.
6. When the power light stops flashing, print a nozzle check pattern again. Repeat cleaning and printing the
pattern until all lines are printed completely.
Related Information
"Loading Paper in the Rear Paper Feed" on page 33
&

Checking and Cleaning the Print Head - Windows

1. Load A4-size plain paper in the printer.
2. Access the printer driver window.
3. Click Nozzle Check on the Maintenance tab.
4. Follow the on-screen instructions.
Related Information
"Loading Paper in the Rear Paper Feed" on page 33
&
"Accessing the Printer Driver" on page 39
&

Checking and Cleaning the Print Head - Mac OS

1. Load A4-size plain paper in the printer.
2. Select System Preferences from the
then select the printer.
3. Click Options & Supplies > Utility > Open Printer Utility.
4. Click Nozzle Check.
5. Follow the on-screen instructions.

Running Power Cleaning

The Power Cleaning utility allows you to replace all of the ink inside the ink tubes. In the following situations, you
may need to use this feature to improve the print quality.
❏ You printed or performed head cleaning when the ink levels were too low to be seen in the ink tank windows.
❏ You performed the nozzle check and head cleaning several times and then waited for at least 12 hours without
printing, but print quality still did not improve.
Maintaining the Printer
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
80