Ink Bottle Handling Precautions - Epson ET-2700 Series User Manual

User's Guide
BK: Black
001
Important:
c
Epson warranty does not cover damage caused by inks other than those specified, including any genuine Epson ink
not designed for this printer or any third party ink.
Other products not manufactured by Epson may cause damage that is not covered by Epson's warranties, and under
certain circumstances, may cause erratic printer behavior.
Note:
❏ Ink bottle codes may vary by location. For the correct codes in your area, contact Epson support.
❏ For users in Europe, visit the following website for information on Epson's ink bottle yields.
http://www.epson.eu/pageyield
Related Information
"Technical Support Web Site" on page 137
&

Ink Bottle Handling Precautions

Read the following instructions before refilling ink.
Handling precautions
❏ Use ink bottles with the correct part code for this printer.
❏ This printer requires careful handling of ink. Ink may splatter when the ink tanks are filled or refilled with ink.
If ink gets on your clothes or belongings, it may not come off.
❏ Do not shake too vigorously or squeeze the ink bottles.
❏ Once you open an ink bottle, we recommend using it as soon as possible.
❏ Store ink bottles at normal room temperature and keep them away from direct sunlight.
❏ Epson recommends using the ink bottle before the date printed on the package.
❏ Store the ink bottles in the same environment as the printer.
❏ When storing or transporting an ink bottle, do not tilt the bottle and do not subject it to impacts or temperature
changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely. Be sure to keep the ink
bottle upright when tightening the cap, and take precautions to prevent ink from leaking when transporting the
bottle, for example, putting the bottle in a bag.
❏ After bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least
three hours before using it.
❏ Do not open the ink bottle package until you are ready to fill the ink tank. The ink bottle is vacuum packed to
maintain its reliability. If you leave an ink bottle unpacked for a long time before using it, normal printing may
not be possible.
❏ If any of the ink tanks are not filled up to the lower line, refill the ink soon. Prolonged use of the printer when
the ink level is below the lower line could damage the printer.
❏ For optimum print results do not maintain low ink levels for extended periods of time.
Refilling Ink
C: Cyan
001
M: Magenta
001
73
Y: Yellow
001