Printing A Network Status Sheet; Replacing Or Adding New Access Points; Changing The Connection Method To A Computer - Epson ET-2700 Series User Manual

User's Guide

Printing a Network Status Sheet

You can check the detailed network information by printing it.
1. Load papers.
2. Hold down the button on the printer's control panel for at least 10 seconds.
The network status sheet is printed.
Note:
If you release the

Replacing or Adding New Access Points

If the SSID changes due to the replacement of an access point, or an access point is added and a new network
environment is established, re-set the Wi-Fi settings.
Related Information
"Changing the Connection Method to a Computer" on page 29
&

Changing the Connection Method to a Computer

Using the installer and re-set up in a different connection method.
❏ Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏ Setting up using the software disc (only for the models that come with a software disc and users with computers
with disc drives.)
Insert the software disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
Network Settings
button within 10 seconds, a network connection report is printed.
29