Control Panel - Epson ET-2700 Series User Manual

User's Guide

Control Panel

A
Turns the printer on or off.
Do not turn off while the power light is flashing (while the printer is operating or processing data).
Unplug the power cord when the power light is off.
B
The upper and lower lights indicate the network status.
❏
(Upper light): Turns on while the printer is connected to a wireless (Wi-Fi) network.
❏
(Lower light): Turns on while the printer is connected to a network in Wi-Fi Direct (Simple AP) mode.
The lights flash alternately or simultaneously while initializing, making network settings, or a problem with the
printer's wireless (Wi-Fi) network connection occurs.
C
When a network error occurs, pressing this button cancels the error. Hold this button down for more than three
seconds to perform Wi-Fi auto setup using the WPS push button.
D
Prints a network connection report allowing you to determine the causes of any problems you may have using the
printer on a network. If you need more detailed network settings and connection status, hold this button down for
at least 10 seconds to print a network status sheet.
E
Starts monochrome copying on A4 size plain paper. To increase the number of copies (by up to 20 copies), press
this button within one second intervals.
F
Starts color copying on A4 size plain paper. To increase the number of copies (by up to 20 copies), press this
button within one second intervals.
G
Stops the current operation.
Hold this button down for three seconds until the
H
Indicates the status of the initial ink charging.
I
Turns on or flashes when paper is out or a paper jam occurs.
Additional functions are available with different combinations of buttons.
+
+ or
+
Printer Basics
Press the and buttons simultaneously to run software on a USB-connected
computer and scan as a PDF file.
y
Press the and the or
Hold down the and buttons simultaneously to start PIN Code Setup (WPS).
P
button flashes to run print head cleaning.
buttons simultaneously to copy in draft mode.
14