Epson ET-2700 Series User Manual page 34

User's Guide
3. Load paper at the center of the paper support with the printable side facing up.
Important:
c
❏ Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not load
above the line just under the
❏ Load paper short edge first. However, when you have set the long edge as the width of the user defined size,
load paper long edge first.
❏ Pre-punched paper
Note:
❏ Load a single sheet of defined size plain paper with binding holes at the left or right.
❏ Adjust the print position of your file to avoid printing over the holes.
4. Slide the edge guides to the edges of the paper, and then close the feeder guard.
Important:
c
Do not place objects on the feeder guard. Doing so may prevent paper from feeding.
Preparing the Printer
d
symbol inside the edge guide.
34