Raytech WR14-R Instruction Manual page 77

After entering this information you have a new Profile to work with.
It's useful to use this sequence of cloning when there are numerous transformers of the same type.
Instruction Manual Winding Resistance Meter
Type WR100 / WR50 / WR14
Template Profiles can be cloned in the Archive
menu. The instrument creates a Transformer
Profile based on the template.
Highlight the Template profile and the "Clone"
button will appear in the display.
It is only possible to Clone a Profile that was
saved as a Template. Newly cloned Profiles
cannot be cloned.
You will be asked to enter a new transformer
name and then the serial number for the newly
cloned Profile.
Enter the Transformer Name and then the Serial
Number then touch "Close" to save the Profile.
Page 77 of 139