Table of Contents
Advertisement
1: Display with Touch Panel
The WR50 can be easily manipulated and fully controlled by the touch screen panel. If preferred,
an external mouse or keyboard can be connected to the USB Port to control the system.
2: Safety Indicator
Green Light on:
System is in safe mode. Ready for handling connections.
Red Light on:
Unsafe mode! Don't remove any cables, there is Current flowing and Voltage
on the test leads!
The Transformer is not discharged!
3: Main Switch
Press to switch on / off
4: Emergency Stop
Press to stop: The measurement will stop and immediately start to discharge the Transformer.
Turn clockwise to release. The device will remain in a safe mode state.
5: USB Interface
Description see chapter 9.1.2 USB on page 103 for details.
Instruction Manual Winding Resistance Meter
Type WR100 / WR50 / WR14
Page 35 of 139
Advertisement
Table of Contents
