Raytech WR14-R Instruction Manual page 43

Transformer Profile
(1. September 2010)
This shows a Transformer which was created and measured for the first time on June 1st 2010.
Then this transformer was measured again on the 1st of each month. This means that the
transformer Profile was loaded from the archive each time a measurement was required and done.
In the example above, it is the 1st of September. The transformer Profile is loaded (made active)
and a measurement is done. The new measurement data was saved and stored (linked) with the
transformer Profile. Thus creating a history for this particular transformer.
Instruction Manual Winding Resistance Meter
Type WR100 / WR50 / WR14
(Header)
Measurement 1
(1. June 2010)
Measurement 2
(1. July 2010)
Measurement 3
(1. August 2010)
Measurement 4
Load it
Do measurement
Measurement 4
(1. September 2010)
Save it
Page 43 of 139