Raytech WR14-R Instruction Manual page 62

Quality Assistant:
If the result is within the selected parameters, a green light in the main screen will indicate this
condition and automatically store the result.
In the interval mode, the selected Interval measurement start recording results.
If the result is out of the selected parameters, a red light in the main screen will indicate this
condition. No results stored.
If the selected conditions are almost met, a yellow light in the main screen will illuminate and
indicate this condition. No results stored.
8
Auto Print Results
If this feature is selected, the instrument will also output to a connected printer when the
measurements are stored.
AutoSave USB:
The results will also be stored on a USB Key if connected to the instrument during a measurement.
8 Not available in WR14
Instruction Manual Winding Resistance Meter
Page 62 of 139
Type WR100 / WR50 / WR14