If the contact between Pin 5 and Pin 6 is open, the instrument acts as if the emergency stop has
been pressed.
without external safety circuit
Internal
Emergency
Signal
Install the plug shown to use the instrument without the extended safety circuit.
Pin 5 and Pin 6 are shorted together in the plug.
Extended Safety Circuit type with 6 pins:
Panelmount Connector (on instrument)
Lemo: ERA.1E.306.CLL
RAN: 40802
Instruction Manual Winding Resistance Meter
Type WR100 / WR50 / WR14
V+
with external safety circuit
Internal
Emergency
Signal
Cablemount Connector (Extern)
Lemo: FFA.1E.306.CLAC60
RAN: 40803
V+
External Safety
Interlock
Page 106 of 139